Description
Package Seal Tester
Our package seal tester allows the user to perform a vacuum test in under 30 seconds. Simply fill the chamber with water. Then submerge a test package in the chamber and place the lid back on top. As soon as the vacuum starts to form, if there are any holes in the packaging, air will be forced out. As a result, the air rises to the top in a stream of bubbles easily visible to the operator.
Applications:
- Package seal testing
- Quality control
- Packaging machine setup
- Altitude simulation
- Material testing
Features:
- Built in vacuum source using compressed air
- Simple manual operation
- Durable 18mm acrylic construction
- Standard and custom size chambers available
To see some of the machining and forming processes head over to our YouTube channel, please click here.
To clean acrylic, PETG or polycarbonate use a mild dish soap and water solution. Wipe with a soft cloth. DO NOT use paper towels, dry cloth or other abrasive material. This may scratch the surface. It could also set up a static charge causing dust to stick to the surface again. Other products such as Novus #1 Antistatic (buy on Amazon), Brillianize (buy on Amazon), Methyl Hydrate or Isopropyl Alcohol can be used. But you must avoid areas with bends or polished areas, as this can cause crazing or cracks in the material. Do not use cleaners that have Ammonia. Cleaning in a dishwasher is also not recommended.